| |
|
|
Preformed Flashings
To assist with the detailing of Sarnafil TG/TS membrane, Sarnafil manufactures a range of preformed flashing, including the C1/125 internal Corner.
 |
 |
The C1/125 is available in either beige or RAL 7040 light grey. When installing preformed corners, all cross joints must be chamfered prior to wiping the corner and membrane with T Prep and hot air welding the flashing in place.
|
|
 |
|
The C2/125 is a preformed external, available in either beige or RAL 7040 light grey. When installing preformed corners, all cross-joints must be chamfered prior to wiping the corner and membrane with T Prep and hot air welding the flashing in place.
|
|
 |
|
Preformed Vent Pipe Flashings are referenced Type V80, V90, V100, V110, V140 and V165, with the numeric reference denoting the internal diameter of the flashing in mm. Available in either beige or RAL 7040 light grey, all cross-joints must be chamfered prior to wiping the flashing and membrane with T Prep, before hot air welding the flashing in place.
|
|
 |
|
Preformed Closed Post Flashings are referenced Type P5 23, P5 29, P5 36, P5 44 and P5 49, with the numeric reference denoting the internal diameter of the flashing in mm. Available in either beige or RAL 7040 light grey, all cross-joints must be chamfered prior to wiping the flashing and membrane with T Prep, before hot air welding the flashing in place.
|
|
 |
|
Preformed Open Post Flashings are referenced Type P6 23, P6 29, P6 36, P6 44 and P6 49, with the numeric reference denoting the internal diameter of the flashing in mm. Available in either beige or RAL 7040 light grey, all cross-joints must be chamfered prior to wiping the flashing and membrane with T Prep, before hot air welding the flashing in place.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
© 2006 Sarnafil Ltd. Legal Disclaimer
|
|
